HIDDEN RINGS
Both the side rims and the sill and upper rim can be embedded and become almost completely hidden. In this way, only the vertical cross profiles of the leaves remain visible, with a front view of 38mm or 26m (to choose), and a section in depth that varies depending on the inertia required to withstand the wind pressure according to span dimensions. The elegance that results from this solution is the ideal answer for architectural projects that seek maximum transparency.

FREE ANGLE
Both the side rims and the sill and upper rim can be embedded and become almost completely hidden. In this way, only the vertical cross profiles of the leaves remain visible, with a front view of 38mm or 26m (to choose), and a section in depth that varies depending on the inertia required to withstand the wind pressure according to span dimensions. The elegance that results from this solution is the ideal answer for architectural projects that seek maximum transparency.

GLAZED WALLS WITH SAFETY AND COMFORT
The glass alone cannot slide and maintain the tightness and mechanical resistance to wind pressure. ARTYAL is able to convert these large glazed surfaces into a resistant, water-tight wall according to tests carried out, with little air permeability and that delays intrusion. All this thanks to the design of the system and the passed tests that certify it.
The movement of these large glazed spaces is done smoothly with weights up to 1200 kg * (for weights over 500 kg it is recommended to motorize). For people with any difficulty in making any small effort, it is possible to motorize all applications.

LARGE DIMENSIONS
• The dimensions H x L depend on the proportion and pressure / dynamic suction of the wind, and it is necessary to calculate according to the project. It is recommended not to exceed the ratio of 2’5 / 1 so that the sheet is easily handled.
• The system has high inertia profiles for heights> 3 m. An inertia calculation must be carried out as a function of wind size and pressure.
• Maximum weight per sheet of 1200 kg. Each sheet has two double stainless steel bearings.
• There is a bearing up to 500 kg and another bearing> 500 kg at 1200 kg.
• For weights over 500 kg it is recommended to motorize the sheets.

THERMAL PERFORMANCES
• Uw <1,0 W/m².K for sliding windows with dimensions H 3000 x L 2800 mm. SEALING PERFORMANCES
• Air permeability: EN 12207 A3.
• Water tightness: EN 12208 E750.
• Wind resistance: EN 12210 C3.

ACOUSTIC PERFORMANCES
• Rw (C, Ctr) = 37 (-1; -1) dB Dimension H3950 x L2400 mm

SAFETY
• Mechanical test EN 13155 class 1 for resistance to maneuvering force and class 4 for resistance to impact.

DESIGN
• Rims that can be embedded in the interior and exterior wall.
• Uprights in the cross of 38 mm or 26 mm aluminum sheets viewed from the front (two versions to choose from).
• Side uprights with handle and built-in clasp, with 30 mm front view.

ACCESSIBILITY AND COMFORT
• Frame built into the floor for absolute comfort of access. Provide drainage below the ground.
• Optional motorization in all applications.

CLOSES
• Multipoint lock system. There are three variants: automatic closing, retention closing and internal key closing.

WITH MINERGIE LABEL
Artyal is a large sliding window designed for demanding climates.
That is why it obtained the MINERGIE label (Swiss quality certificate for buildings with low energy consumption), which requires thermal transmissions equal to or less than 1.0 W / m2K, contributing to comfort, energy savings and reduced CO2 emissions In the atmosphere.

A wide variety of finishes are available to meet the requirements of individual projects, add to existing buildings and provide additional design freedom for architects and designers:

• Anodized in accordance with the “QUALANOD” quality mark.
• Lacquered with a wide range of colors in accordance with the “QUALICOAT” instructions.
• ARTYAL is also available in lacquers and exclusive F2J colors for an elegant and contemporary look.

Click here to check the maintenance conditions for this product.